Kia Picanto JA Quiz
Body Electrical System

Power door lock switch

In this manual: Body Electrical System
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
6steps
~36min
2/5difficulty
Done 0 of 6

Repair Procedures

Inspection

  1. Check the circuit continuity between terminals. If there are deviations, replace the switch.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front left door trim. (Refer to Body - "Front Door Trim")
  3. Remove the power window switch assembly (A) by pulling both ends of the switch holders (B).

Installation

  1. Install the driver's power window switch.
  2. Install the front door trim after connecting the connector.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.