Rear washer motor

Repair Procedures

Inspection

1. 1
   After connecting the washer motor to the reservoir, fill the reservoir with water.
2. 2
   Remove the engine room cover. G 1.0 MPI (See Engine Mechanical System - Engine Room Cover) G 1.2 MPI (See Engine Mechanical System - Engine Room Cover)
3. 3
   Remove the front wheel guard [RH]. (Refer to Body - Front Wheel Guard)
4. 4
   Connect the positive (+) battery cable to terminal 3, and the negative (-) battery cable to terminal 2.
5. 5
   Make sure the motor operates normally, the washer motor runs, and water is sprayed from the front nozzles.
6. 6
   If they are abnormal, replace the washer motor. [Front and rear washer]

   No.	Description
   1	Windshield washer (+)
   2	Ground
   3	Rear Washer (+)