Kia Rio YB Quiz
Body (Interior and Exterior)

Front Seat Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
5steps
~30min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Components and Component Location

Component Location

1. Front Seat Back Frame Assembly 2. Front Seat Cushion Frame Assembly

Repair Procedures

Replacement

  1. Remove the front seat back cover.

    (Refer to Front Seat - "Front Seat Back Cover")

  2. Remove the front seat cushion cover.

    (Refer to Front Seat - "Front Seat Cushion Cover")

  3. Remove the side airbag (SAB) module.

    (Refer to Airbag Module - "Side Airbag (SAB) Module")

  4. Loosen the mounting bolts, then separate the front seatback frame assembly (A) and the front seat cushion frame assembly (B).

    Tightening Torque: 44.1–54 N·m

  5. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.