Kia Rio YB Quiz
Body (Interior and Exterior)

Trunk Lid Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

(4 Doors)

1. Trunk Lid Assembly


Repair Procedures

Replacement

(4 Doors)

  1. Remove the trunk lid trim.

    (Refer to Trunk Lid - "Trunk Lid Trim")

  2. Disconnect the trunk lid connectors and wiring harness (A).

  3. After loosening the mounting bolts, remove the trunk lid assembly (B).

    Tightening torque: 7.8 – 11.8 N·m

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.