Mazda 2 Quiz
Getting to know your Mazda

Immobilizer

In this manual: Getting to know your Mazda
Driving — 65Operation and maintenance — 45IN AN EMERGENCY — 45Interior comfort — 40Technical data — 4Customer Information — 9Getting to know your Mazda — 32Standard Safety Equipment — 24Your Vehicle - At a Glance — 12Fuel Requirements (SKYACTIV-G 1.3, SKYACTIV-G 1.5) — 1Fuel Requirements (SKYACTIV-D 1.5) — 1Emission Control System (SKYACTIV-G 1.3, SKYACTIV-G 1.5) — 1Emission Control System (SKYACTIV-D 1.5) — 1Engine Exhaust Emissions (Carbon Monoxide) — 1Replacing Exterior Light Bulbs — 1Replacing interior bulbs — 1
~3min read

The immobilizer allows the engine to start only when the system recognizes the key.

If someone attempts to start the engine with an unrecognized key, the engine will not start, which helps prevent vehicle theft.

If you have a problem with the immobilizer system or the key, consult an authorized Mazda dealer.

CAUTION

Any changes or modifications made without express approval from the party responsible for compliance may void the user's authority to operate the equipment.

To avoid damaging the key:

  • Do not drop it.
  • Do not get it wet.
  • Do not expose it to any magnetic fields.
  • Do not expose it to high temperatures, such as on the dashboard or engine compartment cover, where it is exposed to direct sunlight.
  • If the engine does not start with the correct key and the security indicator light is on or flashing, the system may be faulty. Consult an Authorized Mazda Dealer.

CAUTION

  • The key has a unique electronic code. For this reason, and for security, replacing a key takes time.

    Keys can only be obtained from an Authorized Mazda Dealer.

  • Keep a spare key in case of emergency. If a key is lost, consult a Mazda Authorized Dealer as soon as possible.

  • If a key is lost, the Authorized Mazda Dealer will erase the electronic codes of your remaining keys and of the immobilizer system. Therefore, you must bring all remaining keys to an Authorized Mazda Dealer.

    The vehicle cannot be started with a key that has not been programmed.

Operation

CAUTION

  • The engine may not start, and the security indicator light may be on or flashing, if the key is placed where the system has difficulty detecting its signal, e.g., on the instrument panel or in the glove box.

    Move the key to another location, turn the ignition off, then start the engine.

  • Signals from radio or TV stations, transmitters or mobile phones may interfere with the vehicle immobilizer system. If you are using the correct key and the engine does not start, check the security indicator light.

Arming

The system arms when the ignition switch is turned from the ON position to the OFF position.

The security indicator light in the instrument cluster flashes every 2 seconds until the system is disarmed.


Disarming

The system disarms when the ignition switch is turned to the ON position using the correct programmed key. The security indicator light will come on for about 3 seconds and then go off. If the engine does not start with the correct key and the security indicator light is on or flashing, try the following: Check that the key is within the range of the signal transmission. Turn the ignition switch to the OFF position, then restart the engine. If the engine does not start after 3 or more attempts, contact an Authorized Mazda Dealer.

CAUTION

  • If the security indicator light flashes while driving, do not stop the engine.

    Drive to the nearest Authorized Mazda Dealer to have the vehicle checked. If you turn off the engine while the light is flashing, it will not be possible to restart it.

  • Because the security electronic codes will be erased during repair of the immobilizer system, keys will be required.

    Bring all keys to an Authorized Mazda Dealer for programming.

Test yourself

A quick Mazda 2 quiz: every answer comes with an explanation and a link to the manual page.