Jack

CAUTION

Your vehicle may or may not be equipped with a jack. For details, consult an Authorized Mazda Dealer.

To Remove the Jack (With Spare Tire)

Sedan

1. Lift the luggage compartment mat.

2. Remove the luggage compartment mat.

3. Unscrew the wing nut and turn the jack screw counterclockwise.

Hatchback

1. Remove the cover.

2. Unscrew the wing nut and the jack screw counterclockwise.

(Without Spare Tire)

1. Lift the luggage compartment floor mat.

2. Remove the jack.

To Stow the Jack

(With Spare Tire)

1. Insert the wing nut into the jack at the jack screw pointing right (Sedan) or downward (Hatchback) and tighten it lightly clockwise.

2. Turn the jack screw in the direction shown in the illustration.

Sedan

Hatchback

3. Turn the wing nut until it stops to secure the jack.

CAUTION

If the jack is not fully secured, it may rattle while driving. Make sure the jack is properly secured.

4. Return the luggage compartment mat to its place (Sedan), or insert the cover hooks and install the cover (Hatchback).

CAUTION

Check that the cover is installed correctly.

(Without Spare Tire)

Perform the reverse of the procedure described above.

Periodic maintenance

• Always keep the jack clean.
• Make sure the moving parts are not dirty or rusted.
• Make sure the jack screw thread is properly lubricated.