Brakes
Adjustment of Brake Caliper Initial Position
In this manual: Brakes
7steps
~42min
3/5difficulty
Done 0 of 7
Description
×: Required —: not required
| Procedure | Initialization position adjustment |
|---|---|
| Removing/ installing ABS actuator and electric unit (control unit) | — |
| Replacing ABS actuator and electric unit (control unit) | × |
| Removing/ installing rear brake pad (When not pressing piston of rear brake caliper assembly) | — |
| Removing/ installing rear brake pad (When pressing piston of rear brake caliper assembly) | — |
| Replacing rear brake pad | × |
| Removing/ installing rear brake caliper assembly | — |
| Replacing rear brake caliper assembly | × |
| Removing/ installing parking brake switch | — |
| Replacing parking brake switch | — |
Work Procedure
PERFORM INITIALIZATION POSITION ADJUSTMENT
Select "ABS", "Work support", and "Initialization position adjustment" according to this order.
Touch "START".
GO TO 2.
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Ignition switch OFF (Auto ACC function OFF) to ON.
Erase self-diagnosis results memory of "ABS".
Pull parking brake switch to activate electric parking brake.
Push parking brake switch to release electric parking brake.
Perform self-diagnosis for “ABS”.
Is malfunction detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>INSPECTION END
Was this page helpful?