Brakes
Vdc Warning Lamp, Abs Warning Lamp and Brake Warning Lamp Turn on
In this manual: Brakes
9steps
~54min
3/5difficulty
Done 0 of 9
Description
ABS warning lamp and Brake warning lamp turn ON for a moment when restating the engine.
Diagnosis Procedure
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
With CONSULT
Start the engine.
Connect booster battery (12V) and jumper cable to 12V battery cable.
Select “Active test” in “ENGINE”.
Select “Auto stop start” in “Active test”.
Touch “Start”.
Check the ABS warning lamp state and the brake warning lamp state when “Cancel” is touched under the idling stop state.
Are the VDC warning lamp, ABS warning lamp and the brake warning lamp OFF?
YES>>Check the 12V battery. Refer to Work Flow.
NO>>GO TO 2.
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Turn the ignition switch OFF → ON.
Repeat step 1 two or more times.
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>INSPECTION END
Was this page helpful?