Brakes

Configuration

~1min read

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the ABS actuator and electric unit (control unit).

The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the ABS actuator and electric unit (control unit).

Refer to Work Procedure.

The configuration no need to “save” configuration data from the ABS actuator and electric unit (control unit). The configuration data is always generated freshly at the server and then downloaded to the CONSULT.

Work Procedure

WRITING VEHICLE SPECIFICATION

With CONSULT

Perform writing vehicle specification to ABS actuator and electric unit (control unit) following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.

>>

WORK END