B130c Tcu Pairing Error
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | |
|---|---|---|---|
| B130C | TCU pairing error (TCU pairing error) |
Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | — | ||
| Threshold | — | ||
| Diagnosis delay time | — | ||
POSSIBLE CAUSE
TCU-BCM pairing during Intelligent Key registration.
TCU
FAIL-SAFE
—
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “TELEMATICS”.
Check DTC.
Is DTC B130C detected?
YES>>Proceed to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
RE-REGISTER INTELLIGENT KEYS
Re-register all Intelligent Keys. For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
>>GO TO 2.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Erase “Self Diagnostic Result” mode of “TELEMATICS”.
Ignition switch OFF → ON.
Select “Self Diagnostic Result” mode of “TELEMATICS”.
Check DTC.
Is DTC B130C detected?
YES>>Replace the TCU. Refer to Removal and Installation.
NO>>Inspection End.