Driver Information & Multimedia

U1a10 Airbag Signal

11steps
~66min
3/5difficulty
Done 0 of 11
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)
DTC detection condition
U1A10

AIRBAG SIGNAL

(Airbag signal)
Diagnosis condition When ignition switch is ON.
Signal (terminal) Car crash information signal
Threshold Abnormality
Diagnosis delay time 1 second or more

POSSIBLE CAUSE

CAN communication system

FAIL-SAFE

  • Some telematics system does not function

  • Inform a NissanConnect center about abnormality

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON.

  2. Select “Self Diagnostic Result” mode of “TELEMATICS”.

  3. Check DTC.

Is DTC U1A10 detected?

YES>>

Proceed to DTC Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End.

Diagnosis Procedure

PERFORM SELF DIAGNOSTIC RESULT OF AIR BAG

CONSULT

  1. Ignition switch ON.

  2. Erase DTC.

  3. Select “Self Diagnostic Result” mode of “AIR BAG”.

  4. Check DTC.

Are any DTCs detected?

YES>>

Refer to DTC Index.

NO>>

GO TO 2.

PERFORM SELF DIAGNOSTIC RESULT OF TELEMATICS

CONSULT

  1. Ignition switch ON.

  2. Erase DTC.

  3. Select “Self Diagnostic Result” mode of “TELEMATICS”.

  4. Check DTC.

Is DTC U1A10 detected?

YES>>

Replace TCU. Refer to Removal and Installation.

NO>>

Refer to Intermittent Incident.