Ventilation, Heater & Air Conditioner

B2578 in-Vehicle Sensor

17steps
~102min
4/5difficulty
Done 0 of 17
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)
DTC detection condition
B2578

IN-Nissan Murano Vehicle SENSOR (SHORT)

(In-vehicle sensor)
Diagnosis condition When ignition switch is ON.
Signal (terminal) -
Threshold More than 212°F (100°C)
Diagnosis delay time -

POSSIBLE CAUSE

  • In-vehicle sensor

  • A/C auto amp.

  • Harness or connectors (The sensor circuit is open or shorted.)

FAIL-SAFE

—

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON.

  2. Select “Self Diagnostic Result” mode of “HVAC”.

  3. Check DTC.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO>>

Inspection End.

DTC Diagnosis Procedure

CHECK IN-VEHICLE SENSOR POWER SUPPLY

  1. Ignition switch OFF.

  2. Disconnect in-Nissan Murano vehicle sensor connector.

  3. Ignition switch ON.

  4. Check voltage between in-vehicle sensor harness connector and ground.

    +−

    Voltage

    (Approx.)
    In-Nissan Murano vehicle sensor
    ConnectorTerminal
    M102 1 Ground 5 V

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

GO TO 4.

CHECK IN-VEHCLE SENSOR GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Check continuity between front in-Nissan Murano vehicle sensor harness connector and ground.

    In-Nissan Murano vehicle sensor—Continuity
    ConnectorTerminal
    M102 2 Ground Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector.

CHECK IN-Nissan Murano Vehicle SENSOR

Check in-vehicle sensor. Refer to Component Inspection.

Is the inspection result normal?

YES>>

Replace A/C auto amp. Refer to Removal and Installation.

NO>>

Replace in-Nissan Murano vehicle sensor. Refer to Removal and Installation.

CHECK IN-VEHCLE SENSOR POWER SUPPLY CIRCUIT FOR OPEN

  1. Ignition switch OFF.

  2. Disconnect A/C auto amp. connector.

  3. Check continuity between in-Nissan Murano vehicle sensor harness connector and A/C auto amp. harness connector.

    In-Nissan Murano vehicle sensorA/C auto amp.Continuity
    ConnectorTerminalConnectorTerminal
    M102 1 M50 27 Yes

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair harness or connector.

CHECK IN-VEHCLE SENSOR POWER SUPPLY CIRCUIT FOR GROUND SHORT

Check continuity between in-Nissan Murano vehicle sensor harness connector and ground.

In-Nissan Murano vehicle sensor—Continuity
ConnectorTerminal
M102 1 Ground No

Is the inspection result normal?

YES>>

GO TO 6.

NO>>

Repair harness or connector.

CHECK IN-Nissan Murano Vehicle SENSOR POWER SUPPLY CIRCUIT FOR POWER SHORT

  1. Ignition switch ON.

  2. Check voltage between in-Nissan Murano vehicle sensor harness connector and ground.

    +−

    Voltage

    (Approx.)
    In-Nissan Murano vehicle sensor
    ConnectorTerminal
    M102 1 Ground 0 V

Is the inspection result normal?

YES>>

Replace A/C auto amp. Refer to Removal and Installation.

NO>>

Repair harness or connector.

Component Inspection

CHECK IN-VEHICLE SENSOR

  1. Ignition switch OFF.

  2. Disconnect in-Nissan Murano vehicle sensor connector.

  3. Check resistance between in-vehicle sensor terminals.

    In-Nissan Murano vehicle sensorConditionResistance: kΩ
    TerminalsTemperature: °F (°C)
    1 2 5 (−15) 12.73
    14 (−10) 9.92
    23 (−5) 7.80
    32 (0) 6.19
    41 (5) 4.95
    50 (10) 3.99
    59 (15) 3.24
    68 (20) 2.65
    77 (25) 2.19
    86 (30) 1.81
    95 (35) 1.51
    104 (40) 1.27
    113 (45) 1.07

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace in-Nissan Murano vehicle sensor. Refer to Removal and Installation.