Ventilation, Heater & Air Conditioner

Magnet Clutch

6steps
~36min
2/5difficulty
Done 0 of 6
Component Function Check

CHECK MAGNET CLUTCH OPERATION

Perform auto active test of IPDM E/R. Refer to Diagnosis Description.

Does it operate normally?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK FUSE

  1. Ignition switch OFF.

  2. Check 10A fuse (No. 53, located in IPDM E/R).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace the blown fuse after repairing the affected circuit.

CHECK MAGNET CLUTCH POWER SUPPLY CIRCUIT

  1. Disconnect A/C compressor connector and IPDM E/R connector.

  2. Check continuity between A/C compressor harness connector and IPDM E/R harness connector.

    A/C compressorIPDM E/RContinuity
    ConnectorTerminalConnectorTerminal
    F3 1 F19 56 Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector.

CHECK MAGNET CLUTCH GROUND CIRCUIT

  1. Disconnect A/C compressor connector.

  2. Check continuity between A/C compressor harness connector and ground.

    A/C compressor—Continuity
    ConnectorTerminal
    F3 2 Ground Yes

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair harness or connector.

CHECK MAGNET CLUTCH

Directly apply battery voltage to the magnet clutch. Check operation visually and by sound.

Does it operate normally?

YES>>

Replace IPDM E/R. Refer to Removal and Installation.

NO>>

Replace magnet clutch. Refer to Removal and Installation of Compressor Clutch.