Ventilation, Heater & Air Conditioner
B27b0 A/c Auto Amp.
In this manual: Ventilation, Heater & Air Conditioner
9steps
~54min
2/5difficulty
Done 0 of 9
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | |
|---|---|---|---|
| B27B0 | A/C AUTO AMP. (A/C auto amp.) |
Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
POSSIBLE CAUSE
A/C auto amp.
FAIL-SAFE
—
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “HVAC”.
Check DTC.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>Inspection End.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “HVAC”.
Select “ERASE”.
Ignition switch OFF.
Ignition switch ON.
Perform “DTC CONFIRMATION PROCEDURE”. Refer to DTC Description.
Is DTC detected again?
YES>>Replace A/C auto amp. Refer to Removal and Installation.
NO>>Inspection End.
Was this page helpful?