Cruise control

The cruise control can store and maintain speeds from 30 to 200 km/h. Downhill and uphill gradients may cause deviations from the stored speed.

For safety reasons, the cruise control can only be activated after you have pressed the brake pedal once. Activation in first gear is not possible.

Do not activate the cruise control when driving at a constant speed is not advisable.

With an automatic transmission, only activate the cruise control in automatic mode.

Indicator light 100.

Switching on

Press the button, the indicator
lights up white on the
instrument cluster.

Activation

Accelerate to the desired speed and turn the thumbwheel to SET/-: the current speed is stored and maintained.

The warning lightLights up green.

The accelerator pedal can be released.

The speed can be increased by pressing the accelerator pedal.

After releasing the accelerator pedal, the stored speed is resumed.

The cruise control remains active during a gear change.

Increasing speed

With the cruise control active, hold the thumbwheel on RES/+ or briefly turn it several times to RES/+: the speed increases continuously or step by step.

Alternatively, accelerate to the desired speed and store it by turning the thumbwheel to SET/-.

Reducing speed

With the cruise control active, hold the thumbwheel on SET/- or briefly turn it several times to SET/-: the speed decreases continuously or step by step.

Deactivation

Press the button, the indicator
m lights up white on the instrument cluster. The cruise control is deactivated. The last set speed is stored for resuming the speed later.

Automatic deactivation:

• vehicle speed below 30 km/h;
• vehicle speed above 200 km/h;
• brake pedal applied;
• clutch pedal depressed for several seconds;
• selector lever in position N;
• engine speed range very low;
• the traction control or Electronic Stability Control has intervened.

Resuming the stored speed

Turn the thumbwheel to RES/+ at a speed above 30 km/h. The stored speed will be resumed.

Deactivation

Press the button, the indicator
goes out on the
instrument cluster.

The stored speed is erased.

Switching the ignition off also switches off the cruise control and erases the stored speed.