Wheel trim

Remove it using hub cap tool 1 (located in the tool holder), engaging the hook in the opening provided near valve 2.

To refit it, orient it in relation to valve 2. Press in the retaining clips, starting with the valve side A, then B and C, and finish with the opposite side to the valve, D.

We recommend noting the number engraved on the key so that it can be replaced if lost.Never leave tools loose in the vehicle: risk of projectiles in the event of braking. After use, make sure to return the tools to their holder, then position it correctly in its housing: risk of injury.

If wheel bolts are supplied, use these bolts exclusively for the spare wheel: refer to the label located on the spare wheel.

The jack is intended for changing a wheel only. It must never be used to carry out a repair or to work underneath the vehicle.