Front headlamps (replacing bulbs)

Direction indicator lamp

Turn the bulb holder 1 a quarter turn and remove the bulb.

Bulb type: PY24.

After refitting the bulb, make sure it is locked in place correctly.

Deactivate
the Stop and Start function before any work in the engine compartment.

Low beam

Remove cover A to access the bulb holders.

To change the bulb:

• remove cover B;
• disconnect wiring connector 2;
• unclip spring clip 3 and remove the bulb.

Bulb type: H7

High beam

To change the bulb:

• remove cover C;
• disconnect wiring connector 4;
• unclip spring clip 5 and remove the bulb.

Bulb type: H1

Be sure to use 55W anti-UV bulbs to avoid degrading the plastic lens of the headlamps.

Do not touch the glass of the bulb.

Hold it by its base.

After replacing the bulb, make sure the cover is correctly refitted.

When
working near the engine, it may be hot. In addition, the cooling fan may start at any time.

Risk of injury.

Front position lamp

To change the bulb, remove cover A.

Pull the bulb holder 6 to access the bulb.

Bulb type: W5W.

When
working near the engine, it may be hot. In addition, the cooling fan may start at any time.

Risk of injury.

Depending on local legislation or as a precaution, obtain from a Brand Representative an emergency kit containing a set of bulbs and a set of fuses.The bulbs
are pressurised and may burst when replaced.

Risk of injury.

Daytime running lamps 7

Consult a Renault dealer.

Front fog lamps 8

As the front bumper must be removed, consult a Brand Representative.

Bulb type: H16.

Auxiliary headlamps

If you wish to fit your vehicle with 'fog' lamps, consult a Brand Representative.

Any
work on (or modification of) the electrical circuit must be carried out by a Brand Representative who has the parts needed for the adaptation, as an incorrect connection could damage the electrical system (wiring, components, in particular the alternator).