Renault Kangoo Quiz
Chassis

Lower arm

In this manual: Chassis
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read
DEPOSE

REMOVAL

Place the vehicle on a two-post lift.

Remove both wheels.

Remove the anti-roll bar mounting nuts from the lower arms.

Lower the anti-roll bar downward to disengage it.

Remove:

  • the nut and the key from the steering knuckle,
  • the two arm mounting bolts on the subframe,
  • the arm.
Bras inférieur

INSTALLATION

NOTE: make sure the plastic protective washer (A) is in place on the lower balljoint pin.

Refit:

  • the arm,
  • the two bolts, without tightening them,
  • the balljoint pin into the steering knuckle and tighten the key nut.

Refit the anti-roll bar and install the mounting nuts; to do this, use tool Sus. 1414 (see anti-roll bar procedure).

This tool compresses the flexible bushing so that the nut can be installed.

Bras inférieur

NOTE: load the suspension and tighten the arm and anti-roll bar bearing mounting nuts to the specified torques (tightening position: unladen).

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.