Chassis
Lower arm balljoint
In this manual: Chassis
~1min read
REMOVAL
If the boot is damaged, the complete balljoint must be replaced.
Proceed in the same way as for lower arm removal.
Loosen, without removing, the two arm mounting bolts (3) on the subframe.

Remove:
- the two balljoint mounting bolts (4),
- the balljoint.
REFITTING
Note: make sure the plastic protective washer (A) is in place on the lower balljoint pin.
Fit the balljoint and tighten its mountings to the specified torque.
Then proceed in the same way as for lower arm refitting.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?