Renault Kangoo Quiz
Chassis

Spring - shock absorber assembly

In this manual: Chassis
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read
DEPOSE

REMOVAL

Vehicle on a 4-post lift

Remove:

  • the wheels,
  • the shock absorber base mounting bolts.

NOTE: disconnect the ABS sensor wiring if fitted to the shock absorber base.

Remove the upper shock absorber nut in the engine compartment.

Remove the spring-shock absorber assembly.

Shock absorber replacement

To replace the shock absorber, clamp it in a vice and compress the spring using a spring compressor.

Remove the spring retaining nut.

Remove the spring and the intermediate components.

Replace the shock absorber bump stop and the rotating thrust bearing if necessary.

When refitting, observe the position of the components and release the spring compression.

NOTE: apply grease between the ends of the spring and its seats.

INSTALLATION

Reverse the removal procedure, observing the tightening torques.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.