Renault Kangoo Quiz
Engine and peripherals

Control unit configuration by gearbox type

In this manual: Engine and peripherals
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

CONFIGURING THE CONTROL UNIT FOR THE GEARBOX TYPE (MANUAL OR AUTOMATIC)

Each time the injection control unit is replaced, it must be taught the type of gearbox (manual or automatic) fitted to the vehicle. The control unit is designed to work with both types of gearbox.

Control unit configuration procedure:

Connect the XR25 diagnostic tool

Set the selector to S8

Switch the ignition on

Press D13, then

For a vehicle fitted with a manual gearbox:

Press G50* 2*

For a vehicle fitted with automatic transmission:

Press G50* 1*

The display shows:

n’est pas réaliséeIf the configuration is not carried out

  puis si la configuration estthenréaliséeIf the configuration is carried out

To check that the memorisation was carried out correctly, switch the ignition back on using diagnostic sheet no. 27. The left fault bar graph 20 must be off, and the right or left status bar graph 19 must be on.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.