Power-adjustable front seats

Switch 3 adjusts the seatback and switch 4 adjusts the seat cushion.

On vehicles so equipped, buttons 2 are used to store the chosen driving position (see next page).

Seat cushion adjustment:

• To move the seat forward or backward, operate switch 4 forward or backward.
• To raise or lower the rear of the seat cushion, operate the rear of switch 4 up or down.
• To raise or lower the front of the seat cushion, operate the front of switch 4 up or down.

Driver's seat lumbar adjustment:

Lower lever 5 to increase support and raise it to reduce support.

Seatback adjustment: To tilt the seatback, operate the top of switch 3 forward or backward.

Heated seats (depending on vehicle)

With the engine running, turn control 1 to one of positions 1, 2 or 3 (depending on the desired temperature).

An indicator light comes on in the instrument panel as soon as the heating of one of the front seats is on.

The system is thermostatically controlled. It regulates the heating and switches it off if necessary.

For
safety reasons, make these adjustments with the vehicle stationary.

To avoid impairing the effectiveness of the seat belts, we advise you not to recline the seatbacks too far.

No objects should be placed on the floor (driver's front footwell): in the event of hard braking, such objects may slide under the pedals and prevent their use.