Bodywork
Rear wheel arch extension
In this manual: Bodywork
4steps
~24min
2/5difficulty
Done 0 of 4
Replacing this part is a basic operation for a rear side impact.
Information on related parts is covered in their respective sections (see contents).
Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.REPLACEMENT PART CONTENTS
Part supplied separately

PARTS CONCERNED (thickness in mm):
- Rear wheel arch extension 0.7
- Rear wing panel gutter lower section 0.9
- Light bracket 0.7
- Rear apron side inner panel 0.7
PART IN POSITION

Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?