Renault Megane Quiz
Bodywork

Rear apron side inner panel

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a basic operation for a rear side collision.

WARNING

The vehicle design does not allow this part to be replaced complete: it can only be replaced partially (see procedure below).

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Supplied pre-assembled with clinch nut.

Doublure latérale de jupe arrière

PARTS CONCERNED (thickness in mm):

  1. Rear apron side inner panel 0.7
Doublure latérale de jupe arrière

PART IN POSITION

Cut detail (a)

Doublure latérale de jupe arrière
Doublure latérale de jupe arrière

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.