Renault Megane Quiz
Bodywork

Rear apron

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a basic operation for a rear collision.

Information on related parts is covered in their respective sections (see contents).

This operation can be carried out in several ways (see procedure below):

  • Complete, supplementary to the rear light bracket.
  • Partial, along cut (a); basic operation for a rear collision.

For information, one or more drawings of the part in position on the vehicle, or offset, are provided in the procedure.

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied alone.

Jupe arrière

PARTS CONCERNED (thickness in mm):

  1. Rear apron

Cut detail (a)

Jupe arrière

Cut detail (b)

Jupe arrière
Jupe arrière

Cutting example

Jupe arrière

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.