Renault Megane Quiz
Bodywork

Light bracket lining

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
3steps
~18min
2/5difficulty
Done 0 of 3

Replacing this part is a complementary operation to replacing the complete rear apron assembly for a rear side collision.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied alone.
Clinch nut

Doublure de support de feu

PARTS CONCERNED (thickness in mm):

  1. Light bracket lining 1
  2. Inner rear wheel arch 0.7
  3. Rear wing gutter lower section 0.9

PART IN POSITION

Doublure de support de feu

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.