Rear light bracket

Replacing this part is a complementary operation to replacing the complete rear apron assembly for a rear collision.

In the operation described below, only the connections specific to the part concerned are described.

Information on related parts is covered in their respective sections (see contents).

REPLACEMENT PART CONTENTS

Part assembled with:
Sealed M6 X2 clinch nut.
Tailgate side stop bracket.

PARTS CONCERNED (thickness in mm):

1. 1
   Rear light bracket 0.7
2. 2
   Rear wing panel gutter 1/0.9
3. 3
   Rear wheel arch extension 0.7
4. 4
   Inner rear wheel arch 0.7

PART IN POSITION

1. 1
   Light bracket
2. 2
   Rear wing panel gutter lower section

   

3. 3
   Rear light bracket
4. 4
   Rear wing panel gutter
5. 5
   Rear wheel arch extension
6. 6
   Inner rear wheel arch

Specifics of the lower light mounting bracket

The bracket is fixed by two screws (A) allowing adjustment of the rear light.

REAR LIGHT ADJUSTMENT

It is advisable to use the side bumper absorber bracket as a positioning template for the bracket.

A temporary additional fitting of the light and tailgate is recommended to ensure correct appearance gaps.