Renault Megane Quiz
Bodywork

Rear wheel arch closing panel

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
2steps
~12min
1/5difficulty
Done 0 of 2

Replacement of this part is an additional operation to replacing the partial outer rear wheel arch for a rear side collision.

Information on related parts is covered in their respective sections (see contents).

Note: The operations described in this procedure are carried out on the left-hand part. The right-hand side has a slightly different shape to allow for the fuel filler neck, but the replacement principle is the same. Note: If spot welds cannot be made with the electric spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied alone.

Fermeture de passage de roue arrière

PARTS CONCERNED (thickness in mm):

  1. Rear wheel arch closing panel 0.7
  2. Inner rear wheel arch 0.7

PART IN POSITION

Fermeture de passage de roue arrière

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.