Renault Megane Quiz
Engine and peripherals

Throttle body: Connection

In this manual: Engine and peripherals
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

K4J

WARNING The throttle body is not repairable.

Boîtier papillon : Branchement

Throttle body connector:

Connecteur du boîtier papillon
  • Motor resistance approx. 1.6 Ω at 23°C
  • Potentiometer resistance; pins 1 and 5: 1000 +/- 250 Ω

If the throttle body is replaced, use the diagnostic tool to reset the stop learning using command RZ005 "Learning".

When the ignition is switched on, the throttle body must perform a MIN and MAX stop learning cycle.

Use the diagnostic tool to check that the learning has been completed: ET051 "Throttle stop learning".

F4R or K4M

WARNING The throttle body is not repairable.

DC electric motor and gear train

Moteur électrique à courant continu et engrenage

Throttle body connector:

Connecteur du boîtier papillon

Potentiometer resistance; pins 2 and 6: 1000 +/- 250 Ω

If the throttle body is replaced, use the diagnostic tool to reset the stop learning using command RZ005 "Learning".

When the ignition is switched on, the throttle body must perform a MIN and MAX stop learning cycle.

Use the diagnostic tool to check that the learning has been completed: ET051 "Throttle stop learning".

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.