DCT (Dual Clutch Transmission) System
Input Speed Sensor 2 Repair Procedures
In this manual: DCT (Dual Clutch Transmission) System
5steps
~30min
2/5difficulty
Done 0 of 5
Removal
- Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air Cleaner")
- Remove the battery and tray. (Refer to Engine Electrical System — "Battery")
- Remove the clutch actuator. (Refer to Dual Clutch Transmission Control System - "Clutch Actuator")
- Disconnect the input shaft speed sensor (A).

- Remove the input shaft speed sensor by loosening the bolts (A-2ea).


Installation
- Install in the reverse order of removal.

- Before installing the input speed sensor, check the condition of the O-rings (A) and apply transmission fluid to the surface of the O-rings.

- Before installing the input speed sensor, check the condition of the O-rings (A) and apply transmission fluid to the surface of the O-rings.
Test yourself
A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?