Warning Light and Message

When the Smart High Beam Assist system is not operating properly, a warning message will appear for several seconds. After the message disappears, the master warning light will illuminate. Have your vehicle inspected by an authorized HYUNDAI dealer.

CAUTION

The system may not operate normally under the following conditions.

• When the light from an oncoming or preceding vehicle is not detected due to a damaged lamp, obstruction from view, etc.
• When the lamps of an oncoming or preceding vehicle are covered with dust, snow, or water.
• When the light from an oncoming or preceding vehicle is not detected due to exhaust gas, smoke, fog, snow, etc.
• When the windshield is covered with foreign matter such as ice, dust, or fog, or is damaged.
• When a lamp of similar shape to the vehicle headlights is present.
• When visibility is poor due to fog, heavy rain, or snow.
• When the headlight is not repaired or replaced at an authorized dealer.
• If the headlight aim is not adjusted properly.
• When driving on narrow, winding, or uneven roads.
• When driving downhill or uphill.
• When only a portion of the vehicle ahead is visible at an intersection or on a curve.
• When there is a traffic light, reflective sign, flashing sign, or mirror.
• When road conditions are poor, such as wet or snow-covered roads.
• When the vehicle headlamps are off but the fog lamps are on.
• When a vehicle suddenly appears from around a curve.
• When the vehicle is tilted due to a flat tire or is being towed.
• When the LKAS (Lane Keeping Assist System) indicator light is illuminated. (if equipped)

WARNING

• Do not place any accessories or stickers on the windshield, and do not tint the windshield.
• Replace the windshield at an authorized dealer.
• Do not remove or strike the related components of the Smart High Beam system.
• Be careful not to allow water to enter the Smart High Beam unit.
• Do not place light-reflecting objects, such as mirrors or white paper, on the instrument panel. The system may malfunction if sunlight is reflected.
• The Smart High Beam system may occasionally malfunction. Always check road conditions for your safety. If the system does not operate normally, switch manually between high and low beam.