Combination Switch
Components
COMPONENTS
ILLUSTRATION
*1 |
CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
*2 |
LOWER INSTRUMENT PANEL FINISH PANEL LH |
*3 |
LOWER INSTRUMENT PANEL FINISH PANEL RH |
*4 |
CONSOLE BOX POCKET SUB-ASSEMBLY |
*5 |
FRONT CONSOLE UPPER PANEL GARNISH |
*6 |
REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
*7 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
- |
- |
ILLUSTRATION
*1 |
COMBINATION SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) |
- |
- |
Inspection
INSPECTION
PROCEDURE
1. INSPECT COMBINATION SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)
(a) Inspect the "NORMAL" or "NORMAL/CUSTOM" mode switch:
(1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the combination switch (electric parking brake switch assembly). |
|
(b) Inspect the "SPORT" or "SPORT S/S+" mode switch:
(1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the combination switch (electric parking brake switch assembly). |
|
(c) Inspect the illumination:
(1) Apply battery voltage to the combination switch (electric parking brake switch assembly) and check that the switch illuminates. OK:
If the result is not as specified, replace the combination switch (electric parking brake switch assembly). |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL COMBINATION SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)
Click here ![]()
2. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Click here ![]()
3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here ![]()
4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here ![]()
5. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY
Click here ![]()
6. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
Click here ![]()
7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here ![]()
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. PRECAUTION
Click here ![]()
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here ![]()
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here ![]()
4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here ![]()
5. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY
Click here ![]()
6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here ![]()
7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here ![]()
8. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Click here ![]()
9. REMOVE COMBINATION SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)
Click here ![]()


