ECM Terminals
ECM TERMINALS
CHECK ECM
HINT:
The standard normal voltage between each pair of ECM terminals is shown in the table below. The correct inspection conditions for each pair of terminals are also shown. Compare the inspection result with the standard normal voltage for the terminal pair shown in the Specified Conditions column. The diagram above can be used as a reference to identify the location of the ECM terminals.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
C63-59 (E1) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
A38-1 (BATT) - C63-59 (E1) |
R - W-B |
Battery (to measure battery voltage and for ECM memory) |
Always |
11 à 14 V |
C63-61 (LIN) - Body ground |
B - Body ground |
LIN communication line |
Ignition Switch in OFF position (while LIN communication is stopped) |
10 kΩ minimum |