3zr-fae Battery / Charging
Precautions
In this manual: 3zr-fae Battery / Charging
~1min read
PRECAUTION
IGNITION SWITCH TERMS
HINT:
The type of ignition switch used varies depending on vehicle specifications. The terms listed in the table below are used in this section.
Term | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
Ignition Switch in OFF position |
LOCK |
OFF (Locked) |
Ignition Switch in ACC position |
ACC |
ON (ACC) |
Ignition Switch in ON position |
ON |
ON (IG) |
Starting the engine |
START |
ON (Starting) |
PRECAUTIONS FOR THE CHARGING SYSTEM
NOTICE:
- Make sure the battery cables are connected to the correct terminals.
- For rapid charging of the battery, disconnect the battery cables.
- Do not perform tests with a high-voltage insulation resistance tester.
- Never disconnect the battery cables while the engine is running.
- Check that the charge cable nuts are tightened at the B terminal of the generator assembly and at the No. 1 relay block in the engine compartment.
Was this page helpful?