Door Lock

ECU Terminals

9steps
~54min
2/5difficulty
Done 0 of 9

ECU TERMINALS

CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

*A

Main Body ECU (Multiplex Network Body ECU) with 2 connectors

-

-

*1

Main body ECU (multiplex network body ECU)

-

-

*a

2 connectors

-

-

*A

Main Body ECU (Multiplex Network Body ECU) with 1 connector

-

-

*1

Main body ECU (multiplex network body ECU)

-

-

*a

1 connector

-

-

(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assy.

Click here

(b) Reconnect the connectors to the instrument panel junction block assy.

(c) Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

MB-11 (GND1) - Body ground

-

Ground

Always

Below 1 Ω

MB-30 (ACC) - Body ground

-

ACC power supply

Engine switch in ON (ACC) position

11 à 14 V

MB-30 (ACC) - Body ground

-

ACC power supply

Engine switch in OFF position

Below 1 V

MB-31 (BECU) - Body ground

-

Battery power supply

Always

11 à 14 V

MB-32 (IG) - Body ground

-

IG power supply

Engine switch in ON (IG) position

11 à 14 V

MB-32 (IG) - Body ground

-

IG power supply

Engine switch in OFF position

Below 1 V

(d) Reinstall the main body ECU (multiplex network body ECU) onto the instrument panel junction block assy.

Click here

(e) Measure the voltage and check the pulses according to the value(s) in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

3D-14 (LSR) - Body ground

LG - Body ground

Rear door unlock detection switch input (left/right)

Left or right rear door unlocked

Below 1 V

3D-14 (LSR) - Body ground

LG - Body ground

Rear door unlock detection switch input (left/right)

Left or right rear door locked

Pulse generation

3D-13 (LSFL) - Body ground

B - Body ground

Front LH door unlock detection switch input

Front LH door unlocked

Below 1 V

3D-13 (LSFL) - Body ground

B - Body ground

Front LH door unlock detection switch input

Front LH door locked

Pulse generation

3D-12 (LSFR) - Body ground

GR - Body ground

Front RH door unlock detection switch input

Front RH door unlocked

Below 1 V

3D-12 (LSFR) - Body ground

GR - Body ground

Front RH door unlock detection switch input

Front RH door locked

Pulse generation

F15-2 (UL3) - Body ground

L - Body ground

Key-linked driver side door unlock input

Driver's door lock cylinder from neutral position → ON (unlock)

Pulse generation → Below 1 V

F15-29 (L2) - Body ground

G - Body ground

Key-linked driver side door lock input

Driver's door lock cylinder from neutral position → ON (lock)

Pulse generation → Below 1 V

F15-6 (FLCY) - Body ground

R - Body ground

Front door (left) courtesy light switch input voltage

Front left door open

Below 1 V

F15-6 (FLCY) - Body ground

R - Body ground

Front door (left) courtesy light switch input voltage

Front left door closed

Pulse generation

F15-27 (FRCY) - Body ground

BR - Body ground

Front door (right) courtesy light switch input voltage

Front right door open

Below 1 V

F15-27 (FRCY) - Body ground

BR - Body ground

Front door (right) courtesy light switch input voltage

Front right door closed

Pulse generation

3H-24 (LCTY) - Body ground

BR - Body ground

Rear door courtesy light switch input voltage (left)

Rear LH door open

Below 1 V

3H-24 (LCTY) - Body ground

BR - Body ground

Rear door courtesy light switch input voltage (left)

Rear LH door closed

Pulse generation

3A-31 (RCTY) - Body ground

BR - Body ground

Rear door courtesy light switch input voltage (right)

Rear RH door open

Below 1 V

3A-31 (RCTY) - Body ground

BR - Body ground

Rear door courtesy light switch input voltage (right)

Rear RH door closed

Pulse generation

3H-34 (BCTY) - Body ground

SB - Body ground

Luggage compartment door courtesy light switch input

Luggage compartment door open

Below 1 V

3H-34 (BCTY) - Body ground

SB - Body ground

Luggage compartment door courtesy light switch input

Luggage compartment door closed

Pulse generation

3H-20 (TR+) - Body ground

Y - Body Ground

Back door lock motor control output

Back door closed → open

Below 1 V → 11 to 14 V → Below 1 V

3H-8 (ACT-) - Body ground

LA-B - Body ground

Door lock motor UNLOCK control output

Door control switch or driver's door key cylinder OFF → ON (unlock)

Below 1 V → 11 to 14 V → Below 1 V

3H-9 (ACT-) - Body ground

B - Body ground

Door lock motor UNLOCK control output

Door control switch or driver's door key cylinder OFF → ON (unlock)

Below 1 V → 11 to 14 V → Below 1 V

3H-18 (ACT+) - Body ground

R - Body ground

Door lock motor LOCK control output

Door control switch or driver's door key cylinder OFF → ON (lock)

Below 1 V → 11 to 14 V → Below 1 V

3H-6 (ACT+) - Body ground

R - Body ground

Door lock motor LOCK control output

Door control switch or driver's door key cylinder OFF → ON (lock)

Below 1 V → 11 to 14 V → Below 1 V

3D-4 (ACTD) - Body ground

B - Body ground

Door lock motor UNLOCK control output

Door control switch or driver's door key cylinder OFF → ON (unlock)

Below 1 V → 11 to 14 V → Below 1 V

3F-29 (BZR) - Body ground

L - Body ground

Remote Door Lock Buzzer

Wireless door lock buzzer OFF

Below 1 V

3F-29 (BZR) - Body ground

L - Body ground

Remote Door Lock Buzzer

Wireless door lock buzzer ON

Pulse generation

INSPECT CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disconnect the F1 connector from the certification ECU (smart key ECU assembly).

(b) Measure the voltage and resistance according to the value(s) specified in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

F1-4 (+B) - Body ground

L - Body ground

Battery power supply

Always

11 à 14 V

F1-18 (E) - Body ground

W-B - Body ground

Ground

Always

Below 1 Ω

(c) Reconnect the F1 connector to the certification ECU (smart key ECU assembly).

(d) Measure the voltage and check the pulses according to the value(s) in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

M67-18 (RCO) - F1-18 (E)

LG - W-B

Output to electronic key and TPMS receiver assembly

(power supply for the electronic key and TPMS receiver assembly. The smart key system ECU (smart key ECU assembly) sends 5 V when the receiver turns on.)

Procedure:
  1. Set the engine switch to OFF
  2. Place the electronic key transmitter assembly outside the detection area but within the range of the remote control function
  3. Press the lock or unlock switch on the electronic key transmitter assembly

Below 1 V → 4.5 to 5.5 V

M67-20 (CSEL) - F1-18 (E)

V - W-B

Communication channel control circuit

Procedure:
  1. Set the engine switch to OFF
  2. Close all doors

No pulse generation → Pulse generation

M67-19 (RDAM) - F1-18 (E)

GR - W-B

Electronic key transmitter assembly and TPMS receiver communication circuit

Procedure:
  1. Set the engine switch to OFF
  2. All doors locked
  3. Place the electronic key transmitter assembly outside the detection area but within the range of the remote control function
  4. Press the lock or unlock switch on the electronic key transmitter assembly

Pulse generation of 11 to 14 at regular intervals → Pulse generation