Door Lock

System Description

~5min read

SYSTEM DESCRIPTION

REMOTE POWER DOOR LOCK SYSTEM

The remote power door lock system can be used to lock and unlock all doors remotely. The system is controlled by an electronic key transmitter sub-assembly that sends radio waves to the electronic key and TPMS receiver assembly. The certification ECU (Smart Key ECU Assembly) performs an ID code identification process and actuates the door lock control.

MULTIPLEX FUNCTION

The remote power door lock system has a multiplex function. Each time the switch on the electronic key transmitter sub-assembly is pressed, the channel alternates between 2 different frequencies and the signal is transmitted to the electronic key and TPMS receiver assembly.

FUNCTION OF MAIN COMPONENTS

Component

Function

Electronic Key Transmitter Sub-assembly

  • Equipped with lock, unlock and hazard switches*1.
  • Transmits weak radio waves (recognition codes and function codes) to the electronic key and TPMS receiver assembly.
  • Lights the LED indicator during transmission.

Electronic Key and TPMS Receiver Assembly

Receives the weak radio waves from the electronic key transmitter sub-assembly and sends them to the certification ECU (Smart Key ECU Assembly).

  • Front left/right door sill light switch assembly
  • Rear door (left/right) courtesy light switch assembly
  • Luggage compartment door sill light switch
  • Lights when a door is opened and goes off when it is closed.
  • Sends door open/closed position signals to the main body ECU (multiplex network body ECU).
  • Front Left/Right Door Lock Assembly with Motor
  • Rear door lock assembly LH/RH with motor
  • Has a built-in motor that locks or unlocks the door.
  • Sends the lock position of each door to the main body ECU (multiplex network body ECU).

Certification ECU (Smart Key ECU Assy)

Sends remote door lock signals in response to the code data from the electronic key and TPMS receiver assembly and to the signals from each ECU.

  • *1: with Toyota Safety Sense P system

SYSTEM OPERATION

The electronic key transmitter sub-assembly has lock and unlock switches. Pressing these switches activates each function.

The wireless power door lock system has the following functions:

HINT:

The default setting of the following functions is ON. Some of these functions can be customized.

Click here

Function

Operation

Locking all doors

Press the lock switch to lock all doors.

Unlocking all doors

Press the unlock switch to unlock all doors.

Unlocking all doors

(2-Step Unlock)

Press the unlock switch twice within 5 seconds. The driver's door unlocks first, then all doors unlock.

Automatic Re-Lock

If none of the doors are opened within 60 seconds after they are unlocked remotely, all doors automatically lock again.

Automatic Response (Hazard Lights)

  • When the doors are locked remotely, the hazard lights flash once.
  • When the doors are unlocked remotely, the hazard lights flash twice.

Automatic Response (Remote Door Lock Buzzer)*1

  • When the doors are locked by remote control, the remote door lock buzzer sounds once.
  • When the doors are unlocked by remote control, the remote door lock buzzer sounds twice.

Panic Alarm*1

Pressing and holding the panic switch on the electronic key transmitter sub-assembly for about 0.8 seconds or more activates the following alarms:

  • Sounds the horn and vehicle alarm.
  • Flashes the headlights, tail lights and hazard lights.
  • Turns on the interior light.

While the panic alarm is operating, pressing any switch on the electronic key transmitter sub-assembly cancels its operation.

Remote Lock Reservation*1, *2

Pressing the lock button on the electronic key transmitter sub-assembly while a door is open locks the door when it is closed.

Door Ajar Warning*2

The buzzer sounds continuously for 5 seconds when the lock switch is pressed and one of the doors is ajar. The buzzer stops when all doors are closed and the unlock switch is pressed.

Entry light

When all doors are locked, pressing the unlock switch turns on the interior light at the same time as the doors unlock.

Self-Diagnosis Mode

When the system is in diagnostic mode and the electronic key and TPMS receiver assembly receives normal radio waves from the electronic key transmitter sub-assembly, it activates the remote door lock buzzer, which sounds a normal sequence corresponding to the function of each switch.

  • *1: with Toyota Safety Sense P system

HINT:

*2: If the customization setting "Wireless Lock Function with Doors Open" is set to ON, the "Door Ajar Warning" will no longer operate. If the "Door Ajar Warning" is set to ON, the "Wireless Lock Function with Doors Open" will no longer operate. If both settings are set to ON, priority is given to the "Wireless Lock Function with Doors Open".