Supplemental Restraint Systems

Data List / Active Test

~4min read

DATA LIST / ACTIVE TEST

DATA LIST

HINT:

The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Body Electrical / Occupant Detection / Data List.

(f) Read the Data List by following the Techstream instructions.

Body Electrical > Occupant Detection > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

Front Left Sensor Weight Information

Front Left Sensor Weight Information

Min.: -75.852 kg (-167.224 lb.)

Max.: 104.737 kg (230.903 lb.)

Displayed current value

-

Rear Left Sensor Weight Information

Rear Left Sensor Weight Information

Min.: -75.852 kg (-167.224 lb.)

Max.: 104.737 kg (230.903 lb.)

Displayed current value

-

Total Weight Information

Total Weight Information

Min.: -151.704 kg (-334.447 lb.)

Max.: 209.475 kg (461.808 lb.)

Displayed current value

-

Weight Forward and Rearward Difference

Front and Rear Weight Difference

Min.: -180.589 kg (-398.127 lb.)

Max.: 180.589 kg (398.126 lb.)

Displayed current value

-

Airbag Total Weight

Total Weight Information for Airbag System

Min.: -161.595 kg (-356.253 lb.)

Max.: 226.017 kg (498.277 lb.)

Displayed current value

-

Belt Warning Total Weight

Total Weight Information for Seat Belt Reminder System

Min.: -155.001 kg (-341.716 lb.)

Max.: 219.400 kg (483.689 lb.)

Displayed current value

-

VSC Status

Vehicle Speed Status

ON or OFF

ON: Vehicle speed valid

-

VSC Vehicle Speed

Vehicle speed

Min.: 0 km/h

Max.: 328 km/h

Displayed current value

-

VSC Zero Point1

Acceleration Sensor Zero Point 1

Min.: -4.5952 m/s2

Max.: 4.5593 m/s2

Displayed current value

-

VSC Zero Point2

Acceleration Sensor Zero Point 2

Min.: -4.5952 m/s2

Max.: 4.5593 m/s2

Displayed current value

-

VSC Calibration Status

Vehicle Stability Control System Calibration Status

Calibrated or Not Calibrated

Calibrated

-

VSC Assembly Information

Acceleration Sensor Assembly Information

Normal Position or Reverse Position

Normal Position or Reverse Position

Displays a fixed value for each vehicle.

Yaw Rate/G Sensor Voltage Invalid Flag

Yaw Rate/G Sensor Voltage Invalid Flag

ON or OFF

ON: Valid

-

Yaw Rate/G Sensor Malfunction Flag1

Yaw Rate/G Sensor Malfunction Flag 1

OK or NG

OK

-

Yaw Rate/G Sensor Invalid Flag1

Yaw Rate/G Sensor Invalid Flag 1

ON or OFF

ON: Valid

-

Yaw Rate/G Sensor Malfunction Flag2

Yaw Rate/G Sensor Malfunction Flag 2

OK or NG

OK

-

Yaw Rate/G Sensor Invalid Flag2

Yaw Rate/G Sensor Invalid Flag 2

ON or OFF

ON: Valid

-

Yaw Rate/G Sensor Assembly Information

Yaw Rate and Acceleration Sensor Assembly Information for Occupant Classification System

Disabled, Reverse Position or Normal Position.

Normal Position or Reverse Position

  • Displays a fixed value for each vehicle.
  • "Unset" is displayed for approximately 2 seconds after the ignition switch is turned ON.

Passenger Detection (Airbag)

Passenger Classification

OFF/Child, CRS1, CRS2, AF05 or AM50

OFF/Child: Vacant or a child is occupying the seat

CRS1: Child restraint system is installed

CRS2: Child restraint system is installed

AF05: An adult is occupying the seat

AM50: An adult is occupying the seat

-

Passenger Detection (Belt Warning)

Passenger Detection for Seat Belt Reminder System

OFF, Baggage or ON

OFF: The seat is unoccupied

Baggage: The seat is occupied by baggage

ON: The seat is occupied

-

Driving Status

Vehicle driving status:

Stopped, Driving or Turning

Stop: Vehicle stopped

Driving: The vehicle is traveling in a straight line

Turning: The vehicle is turning

-

Passenger Buckle SW

Front Passenger Seat Belt Buckle Switch

NG, Set or Unset

Set: The front passenger seat belt is fastened

Unset: The front passenger seat belt is not fastened

"NG" is displayed as soon as the ignition switch is turned to ON.