Exterior Panels / Trim
Disassembly
In this manual: Exterior Panels / Trim
~1min read
DISASSEMBLY
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. REMOVE BODY OUTSIDE MOULDING CUSHION NO. 1
(a) Remove the body outside moulding cushion No. 1 (double-sided adhesive tape).
HINT:
Do not pull on the body outside moulding cushion No. 1 (double-sided adhesive tape). Instead, roll the adhesive tape upward with your finger to remove it cleanly.
(b) Using a cloth and residue-free solvent, clean the body outside moulding cushion No. 1 residue (from the double-sided adhesive tape) remaining on the quarter outside moulding subassembly.
Was this page helpful?