Removal
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. REMOVE QUARTER OUTSIDE MOULDING
HINT:
When removing the quarter outside moulding, if the body outside moulding cushion No. 1 (double-sided adhesive tape) is difficult to remove, heat the quarter outside moulding adhesive tape using a heat lamp.
Standard:
Item | Temperature |
|---|---|
Quarter outside moulding |
20 à 30 °C |
CAUTION:
- Do not touch heated parts or the heat lamp. Touching them may cause burns.
*a
Hot Surface
*b
Heat Lamp
- Prolonged contact with heated parts may cause burns.
NOTICE:
Do not overheat the quarter outside moulding.
(a) Remove the 3 screws and clip.
(b) Apply protective tape around the quarter outside moulding.
![]() |
Protective tape |
(c) Release the clips by pressing the area indicated by the arrow in the illustration with your finger.
![]() |
Place hands here |
![]() |
Remove in this direction (1) |
![]() |
Remove in this direction (2) |
NOTICE:
To avoid damaging the claws, do not pull the quarter outside moulding with excessive force.
(d) Release the clips and detach the double-sided adhesive tape to remove the quarter outside moulding.
*1 |
Body outside moulding cushion No. 1 (double-sided adhesive tape) |
- |
- |
![]() |
Place hands here |
![]() |
Remove in this direction |
.png)
.png)
.png)
.png)