Installation
INSTALLATION
PRECAUTION / NOTICE / HINT
HINT:
- Repeat the same procedure for the right side and the left side.
- The following procedure applies to the left side.
PROCEDURE
1. INSTALL QUARTER OUTSIDE MOULDING
HINT:
When installing the quarter outside moulding, heat the vehicle body and the quarter outside moulding using a heat lamp.
CAUTION:
- Do not touch heated parts or the heat lamp. Touching them may cause burns.
*a
Hot Surface
*b
Heat Lamp
- Prolonged contact with heated parts may cause burns.
Standard:
Item | Temperature |
|---|---|
Vehicle Body |
40 à 60 °C |
Quarter outside moulding |
20 à 30 °C |
NOTICE:
Do not overheat the vehicle body or the quarter outside moulding.
(a) Clean the surface of the vehicle body.
(1) Using a heat light, heat the surface of the vehicle body.
(2) Remove the double-sided tape from the vehicle body.
(3) Remove any adhesive residue using a cleaning agent.
(b) Remove the protective sheet from a new quarter outside moulding.
HINT:
After removing the release liner, prevent the adhesive surface from contacting foreign matter.
(c) Engage the clips and attach the double-sided adhesive tape.
*a |
Double-sided adhesive tape |
- |
- |
![]() |
Install in this direction |
- |
- |
HINT:
Press the quarter outside moulding to install it.
(d) Engage the claws.
(e) Install the 3 screws and clip.
(f) Remove the protective tape.
.png)