Exterior Panels / Trim

Disassembly

~6min read

DISASSEMBLY

PROCEDURE

1. REMOVE RADIATOR GRILLE

Click here

2. REMOVE FRONT BUMPER EXTENSION LH

(a) Release the claws and guide to remove the front bumper extension LH.

3. REMOVE FRONT BUMPER EXTENSION RH

HINT:

Perform the same procedure as for the left side.

4. REMOVE LEFT FOG LIGHT ASSEMBLY (with fog light)

(a) Remove the 2 screws.

(b) Release the guide to remove the left fog light assembly.

5. REMOVE RIGHT FOG LIGHT ASSEMBLY (with fog light)

HINT:

Perform the same procedure as for the left side.

6. REMOVE LEFT FOG LIGHT COVER

(a) with fog lights:

(1) Remove the 3 screws and the left fog light cover.

(b) without fog lights:

(1) Remove the 3 screws and the left fog light cover.

7. REMOVE RIGHT FOG LIGHT COVER

HINT:

Perform the same procedure as for the left side.

8. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH

(a) Remove the screw.

(b) Remove the clip.

(c) Release the claws to remove the front bumper side mounting bracket LH.

9. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH

HINT:

Perform the same procedure as for the left side.

10. REMOVE FRONT FENDER APRON RETAINER

(a) Release the claws to remove the front fender apron retainer.

HINT:

Perform the same procedure on the opposite side.

11. REMOVE FRONT BUMPER HOLE COVER

(a) Release the claws and hook to remove the front bumper hole cover.

12. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET

(a) for USA and Canada:

(1) Remove the 2 screws and the front bumper extension mounting bracket.

(b) except USA and Canada:

(1) Remove the 2 screws.

(2) Release the claws to remove the front bumper extension mounting bracket.

13. REMOVE INNER RADIATOR GRILLE

(a) Release the claws to remove the inner radiator grille.

14. REMOVE FRONT BUMPER LOWER SHIELD

(a) for USA and Canada:

(1) Remove the 2 clips and the 6 outer moulding retainers.

(2) Release the claws and guides to remove the front bumper lower cover.

(3) Remove the 8 grommets.

(b) except USA and Canada:

(1) Remove the 2 clips and the 8 outer moulding retainers.

(2) Release the claws and guides to remove the front bumper lower cover.

(3) Remove the 8 grommets.

15. REMOVE RADIATOR GRILLE MOULDING NO. 1 (except United States and Canada)

(a) Release the claws to remove the radiator grille moulding No. 1.

HINT:

Perform the same procedure on the opposite side.

16. REMOVE FRONT BUMPER SIDE RETAINER LH

(a) Remove the bolt.

(b) Release the claw to remove the front bumper side retainer LH, as shown in the illustration.

Remove in this direction

17. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:

Perform the same procedure as for the left side.

18. REMOVE RADIATOR GRILLE RETAINER NO. 1

(a) Release the claws to remove the radiator grille retainer No. 1, as shown in the illustration.

Remove in this direction

19. REMOVE RADIATOR SUPPORT SEAL NO. 1

(a) Release the wire harness clamp.

(b) Remove the 2 clips.

(c) Remove the radiator support seal No. 1, as shown in the illustration.

Remove in this direction

20. REMOVE FRONT BUMPER ENERGY ABSORBER

(a) for USA and Canada:

(1) Release the guides to remove the front bumper energy absorber, as shown in the illustration.

Remove in this direction

(b) except USA and Canada:

(1) Release the guides to remove the front bumper energy absorber, as shown in the illustration.

Remove in this direction

21. REMOVE FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT (for United States and Canada)

(a) Release the claws to remove the front energy absorber mounting reinforcement.

22. REMOVE FRONT BUMPER LOWER ENERGY ABSORBER

(a) for USA and Canada:

Remove in this direction

(1) Release the guides to remove the front bumper lower energy absorber, as shown in the illustration.

(b) except USA and Canada:

(1) Release the guides to remove the front bumper lower energy absorber, as shown in the illustration.

Remove in this direction

23. REMOVE FRONT BUMPER REINFORCEMENT

(a) for USA and Canada:

(1) Release the wire harness clamps.

(2) Remove the 6 bolts.

(3) Release the guides to remove the front bumper reinforcement.

(b) except USA and Canada:

(1) Release the wire harness clamps.

(2) Remove the 6 bolts.

(3) Release the guides to remove the front bumper reinforcement.

24. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH

(a) for USA and Canada:

(1) Remove the 5 bolts.

(2) Release the guides to remove the front left side member bracket sub-assembly.

(b) except USA and Canada:

(1) Release the wire harness clamp.

(2) Remove the 4 bolts.

(3) Release the guides to remove the front left side member bracket sub-assembly.

25. REMOVE FRONT RIGHT SIDE MEMBER BRACKET SUB-ASSEMBLY

(a) for USA and Canada:

(1) Remove the 4 bolts.

(2) Release the guides to remove the front right side member bracket sub-assembly.

(b) except USA and Canada:

HINT:

Perform the same procedure as for the left side.

26. REMOVE FRONT BUMPER REINFORCEMENT NO. 2

(a) Remove the 2 nuts and front bumper reinforcement No. 2.

27. REMOVE FRONT BUMPER BRACKET LH

(a) Remove the 4 bolts and front bumper bracket LH.

28. REMOVE FRONT BUMPER BRACKET RH

HINT:

Perform the same procedure as for the left side.

29. REMOVE RADIATOR SIDE AIR GUIDE NO. 1 LH

(a) Release the claw and guide to remove the No. 1 radiator side air guide LH, as shown in the illustration.

Remove in this direction (1)

Remove in this direction (2)

30. REMOVE RADIATOR SIDE AIR GUIDE NO. 1 RH

(a) Release the claw and guide to remove the No. 1 radiator side air guide RH, as shown in the illustration.

Remove in this direction (1)

Remove in this direction (2)