Removal
REMOVAL
PROCEDURE
1. REMOVE LH FRONT DOOR SILL PLATE
Click here![]()
2. REMOVE LH FENDER APRON SIDE PANEL
Click here![]()
3. REMOVE NO. 2 INSTRUMENT PANEL LOWER COVER SUB-ASSEMBLY
Click here![]()
4. REMOVE NO. 1 AIR DUCT
Click here![]()
5. REMOVE NO. 2 HEATER COVER (VALEO make)
(a) Release the latch. |
![]() |
(b) Disconnect the connector.
(c) Remove the screw and No. 2 heater cover. |
![]() |
6. REMOVE NO. 2 HEATER COVER (DENSO make)
(a) Release the latch. |
![]() |
(b) Disconnect the 2 connectors.
(c) Remove the screw. |
![]() |
(d) Release the claw and guide to remove the No. 2 heater cover.
7. REMOVE QUICK HEATER ASSEMBLY (VALEO make)
(a) Remove the 2 screws and the quick heater assembly, as shown in the illustration.
![]() |
Remove in this direction |
8. REMOVE QUICK HEATER ASSEMBLY (DENSO make)
(a) Release the guide to remove the quick heater assembly, as shown in the illustration.
![]() |
Remove in this direction |




.png)