Installation
INSTALLATION
PROCEDURE
1. INSTALL QUICK HEATER ASSEMBLY (VALEO make)
(a) Reinstall the quick heater assembly using the 2 screws, as shown in the illustration.
![]() |
Install in this direction |
2. INSTALL QUICK HEATER ASSEMBLY (DENSO make)
(a) Engage the guide to install the quick heater assembly as shown in the illustration.
![]() |
Install in this direction |
3. INSTALL NO. 2 HEATER COVER (VALEO make)
(a) Reinstall the No. 2 heater cover using the screw. |
![]() |
(b) Connect the connector. |
![]() |
(c) Engage the clip.
4. INSTALL NO. 2 HEATER COVER (DENSO make)
(a) Engage the guide and claw. |
![]() |
(b) Install the No. 2 heater cover with the screw.
(c) Connect the 2 connectors. |
![]() |
(d) Engage the clip.
5. INSTALL NO. 1 AIR DUCT
Click here![]()
6. INSTALL NO. 2 INSTRUMENT PANEL LOWER COVER SUB-ASSEMBLY
Click here![]()
7. INSTALL COWL SIDE TRIM BOARD LH
Click here![]()
8. INSTALL FRONT DOOR SCUFF PLATE LH
Click here![]()
.png)
.png)
.png)
.png)
.png)