Removal
REMOVAL
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel. CAUTION:
|
![]() |
2. REMOVE SHIFT LEVER CAP
(a) Using a screwdriver with its tip wrapped in protective tape, release the 2 claws and remove the shift lever cap from the shift position indicator. NOTICE: Take care not to damage the shift lever cap and the instrument panel garnish. |
|
(b) Move the shift lever to N.
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here![]()
4. REMOVE REAR CONSOLE BOX ASSEMBLY
Click here
![]()
5. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET
(a) Release the 3 clips to detach the wire harness from the No. 1 console box mounting bracket. |
![]() |
(b) Remove the 2 bolts and the No. 1 console box mounting bracket from the vehicle body.
6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
![]() |
Remove in this direction |
(a) Disconnect the end of the transmission control cable assembly from the floor shift lever assembly.
*1 |
Slider |
![]() |
Push in |
![]() |
Remove in this direction |
(b) Push the slider and remove the transmission control cable from the floor shift lever assembly as shown in the illustration.
7. REMOVE FLOOR SHIFT LEVER ASSEMBLY
(a) Disconnect the 2 connectors from the floor shift lever assembly. |
![]() |
(b) Release the 6 clips to detach the wire harness from the floor shift lever assembly.
(c) Remove the 4 bolts and the floor shift lever assembly from the vehicle body. |
![]() |
.png)


.png)
.png)

