K114 Continuously Variable Transmission
Reassembly
In this manual: K114 Continuously Variable Transmission
~1min read
REASSEMBLY
PROCEDURE
1. INSTALL SHIFT LEVER HOUSING SUPPORT SUB-ASSEMBLY
(a) Engage the 4 claws to install the shift lever housing support sub-assembly on the shift lock control unit assembly. |
![]() |
2. INSTALL SHIFT POSITION INDICATOR
(a) Install the drive position indicator on the console upper panel sub-assembly with the 3 screws.
3. INSTALL SHIFT HOLE COVER SUB-ASSEMBLY
(a) Engage the 4 guides and the 6 claws to install the shift hole cover sub-assembly on the console upper panel sub-assembly.
Was this page helpful?
.png)