K114 Continuously Variable Transmission

Inspection On Vehicle

~3min read

INSPECTION ON VEHICLE

PROCEDURE

1. SECURE VEHICLE

(a) Fully apply the parking brake and chock a wheel.

CAUTION:

  • Be sure to apply the parking brake and chock a wheel before performing this operation.
  • If the vehicle is not secured and the shift lever is moved to the N position, the vehicle may move suddenly and cause an accident or serious injury.

2. INSPECT SHIFT LEVER POSITION

(a) While moving the shift lever from position P to each position with the ignition switch ON and the brake pedal depressed, check that the shift lever moves smoothly and correctly into each position.

(b) Start the engine and check that the vehicle moves forward when the shift lever is moved from position N to D, and moves backward when the shift lever is moved to position R.

If the operation is not as specified, inspect the park/neutral position switch and shift lever assembly.

3. INSPECT SHIFT LOCK OPERATION

(a) Place the shift lever in P.

(b) Turn the ignition switch OFF.

(c) Check that the shift lever cannot be moved from P to any other position.

(d) Turn the ignition switch ON, depress the brake pedal, and check that the shift lever can be moved to another position.

If the operation is not as specified, inspect the shift lever assembly.

4. INSPECT SHIFT LOCK RELEASE BUTTON OPERATION

(a) Place the shift lever in P.

(b) Turn the ignition switch OFF.

(c) Remove the shift lever knob.

(d) While pressing the shift lock release button, move the shift lever from the P position to another position, and check that the lever can be moved.

If the operation is not as specified, inspect the shift lever assembly.

(e) Install the shift lever cap.

5. INSPECT KEY INTERLOCK OPERATION (without Smart Key System)

(a) Turn the ignition switch to ON.

(b) Depress the brake pedal and move the shift lever to any position other than P.

(c) Check that the ignition key cannot be turned to the LOCK position.

(d) Move the shift lever to P, turn the ignition key to the LOCK position, and check that the ignition key can be removed.

If the operation is not as specified, inspect the shift lever assembly.