System Description
SYSTEM DESCRIPTION
FRONT WIPER AND WASHER CONTROL FUNCTION
Control/Function | Description |
|---|---|
MIST function |
Operates the wipers in LO mode while the front wiper switch assembly is held in the MIST position. |
Automatic operation (with rain sensor) |
Operates the wipers as requested by the rain sensor when the front wiper switch assembly is in the AUTO position. HINT:
|
Intermittent wiper operation control (without rain sensor) |
Controls the wiper delay when the front wiper switch assembly is in the INT position. HINT: The delay period is controlled by the intermittent delay switch of the front wiper switch assembly. |
Washer linked operation |
NOTICE: If the washer switch is operated for at least 40 seconds, the wipers stop operating to prevent overheating of the front washer motor, and the wipers return to the park position. |
Wiper drip prevention function |
3 seconds after the washer stops, operates the wipers for 1 cycle to remove any washer fluid that has not drained. HINT: This function operates only when the vehicle is stationary and does not operate when the vehicle is traveling at a speed of at least 4 km/h. |
REAR WIPER AND WASHER CONTROL FUNCTION
Control/Function | Description |
|---|---|
Rear wiper intermittent operation control |
Operates the rear wiper once every 12 seconds when the rear wiper switch is in the INT position. |
Washer linked operation |
NOTICE: If the washer switch is operated for at least 40 seconds, the wipers stop operating to prevent overheating of the front washer motor, and the wipers return to the park position. |
WASHER FLUID LEVEL WARNING FUNCTION (for vehicles for cold regions)
Control/Function | Description |
|---|---|
Low washer fluid warning |
Displays the message "Windshield Washer Fluid Low" on the multi-function display of the instrument cluster assembly when the washer fluid level is low. |