Wiper / Washer

Fail-Safe Table

~1min read

FAIL-SAFE TABLE

RAIN SENSOR FAIL-SAFE FUNCTION

(a) The windshield wiper switch assembly performs the fail-safe function when the wiper system cannot properly receive the required signals from the wiper control system, or when a wiper system component malfunctions.

Item

Fail-safe function

Return to normal conditions

Rain sensor LIN communication error

Continues control based on the conditions detected before the malfunction

LIN communication returns to normal.

Rain sensor voltage is too low

Rain sensor voltage returns to normal.

Rain sensor signal malfunction

Performs intermittent wiping based on the position of the automatic sensitivity adjustment switch.

Rain sensor returns to normal.

Rain sensor temperature is too high (at least 90 °C).

Stops wiper operation

The rain sensor temperature is too low (-15°C (5°F) or less).