Driving
Operating Instructions
In this manual: Driving
5steps
~30min
2/5difficulty
Done 0 of 5
Turn the end of the light switch to turn the lights on as follows:
The headlights, daytime running lights and all the lights listed below turn on and off automatically.(When the ignition switch is in "ON" [vehicles without smart entry & start system] or when the ignition switch is in START mode [vehicles with smart entry & start system])
The front and rear position lights, license plate lights and instrument panel lights turn on.
The headlights and all the lights listed above turn on.
Turning on the high beams
- With the headlights on, push the light switch forward to turn on the high beams.
Pull the light switch toward you to the middle position to turn off the high beams.
- To flash the headlights, pull the light switch toward you and release it.
This allows you to flash the headlights whether the headlights are on or off.

Was this page helpful?