Theft Deterrent / Keyless Entry

Smart Key Oscillator (Rear Floor)

~2min read

Components

COMPONENTS

ILLUSTRATION

*1

REAR SEAT CUSHION ASSEMBLY (BENCH TYPE)

*2

NO. 2 INTERIOR SMART KEY ANTENNA ASSEMBLY

*3

REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

*4

REAR SEAT CUSHION LOCK HOOK

*5

FRONT CARPET ASSEMBLY

-

-

●

Non-reusable part

-

-

Installation

INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INTERIOR SMART KEY ANTENNA ASSEMBLY

(a) Attach the clip to install the No. 2 interior smart key antenna assembly as shown in the illustration.

Install in this direction

NOTICE:

Be careful when installing the No. 2 interior smart key antenna assembly. If the No. 2 interior smart key antenna assembly is dropped, replace it with a new one.

(b) Connect the connector.

(c) Turn over the front carpet assembly.

2. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here

3. INSTALL REAR SEAT CUSHION ASSEMBLY (BENCH TYPE)

Click here

4. CONNECT REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

Click here

Removal

REMOVAL

PROCEDURE

1. DISCONNECT REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

Click here

2. REMOVE REAR BENCH SEAT ASSEMBLY

Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here

4. REMOVE NO. 2 INTERIOR SMART KEY ANTENNA ASSEMBLY

(a) Remove the front carpet assembly until the No. 2 interior smart key antenna assembly can be removed.

(b) Disconnect the connector.

Remove in this direction

(c) Using a clip remover, release the clip to remove the No. 2 interior smart key antenna assembly as shown in the illustration.

NOTICE:

Be careful when removing the No. 2 interior smart key antenna assembly. If the No. 2 interior smart key antenna assembly is dropped, replace it with a new one.